| |
|
|
|
 |
DS4 |
Electronic Pressure Switch
Thanks to its stainless steel diaphragm and semiconductor thin-film technology, the electronic pressure switch has excellent properties guarantying a high degree of stability and compatibility with media as well as vacuum-tightness. |
|
| |
|
|
|
| |
DS5 |
Electronic Pressure Switch
The pressure switch DS5 combines the advantages of the series SML with the switch functionality.
Due to the usage of a 14bit (15bit optional) electronic it is possible to achieve a high accuracy at the set/reset points. The internal use of digital values enables the switch to work in very dynamic systems as well as in regular assemlby lines (e.g.). The max. frequency to measure is about 1kHz. The switch option is adoptable for any pressure range from 600mbar to 2000bar.
The components used alowes the DS5 to work in applications with up to 125°C (257°F) for the media and max. 105°C (221°F).
The DS5 is only available as "factory set" at the moment.
Switch options:
-
 normally open
- normally closed
- window function
- accuracy at switch setpoint below 0,3%
- high active
- low active
A PC Software and programming adapter for in-field setup are in preparation |
|
| |
|
|
|
 |
DPSX9I |
Intrinsically Safe Electronic Pressure Switch with current output
The pressure transmitter consists of a detached measuring cell, which can be installed within an area exposed to explosion hazards, and evaluation electronics.
- 0...5 mbar up to 0...2000 bar
- -40...100°C (-40...212°F) media
- 0,50 (1,00) % accuracy at room temperature
|
|
| |
|
|
|
|
DPSX9U |
Pressure Transmitter with CANopen Interface
Intrinsically Safe Electronic Pressure Switch with voltage output
The pressure transmitter consists of a detached measuring cell, which can be installed within an area exposed to explosion hazards, and evaluation electronics.
- 0...5 mbar up to 0...2000 bar
- -40...100°C (-40...212°F) media
- 0,50 (1,00) % accuracy at room temperature
|
|
| |
|
|
|
